Difference between revisions of "2014 Yearly Meeting"

From Bloominglabs
Jump to: navigation, search
Line 37: Line 37:
 
* Membership grew over the summer (has since dropped a bit but still more than last year)
 
* Membership grew over the summer (has since dropped a bit but still more than last year)
 
* We got more press on the Internet/radio/print media
 
* We got more press on the Internet/radio/print media
*
+
* Classes and Workshops
  
 
=== Meeting Notes ===
 
=== Meeting Notes ===
 +
We got a laser cutter! And broke it twice. Once because of a defective tube, another time because laser tubes apparently do not appreciate the frozen outside air coming in through the direct access vent...oops.
  
 +
Makevention was obviously awesome, thanks everyone! (especially Jenett)
 +
 +
Membership grew to over 30 at one point! We will get up there again, some day, so we aren't worried about it.
 +
 +
We have had a lot of good press throughout the year, from WFIU and other media events we've participated in. We have heard people say that they took their job in Bloomington specifically because they knew that there was a hackerspace here. We have yet to hear anything negative about the space, and have even specifically looked for it through reviews etc. If you come across anything please say something so we can find out how to improve.
 +
 +
We have put on several workshops and classes throughout the year (Arduino, Lathe, Rain Barrel, etc).
  
 
== Areas for Improvement ==
 
== Areas for Improvement ==
Line 65: Line 73:
  
 
=== Meeting Notes ===
 
=== Meeting Notes ===
 +
To run soon: Arduino class, AI class, brewing class, laser class, solar panel class
 +
 +
=== Action Items ===
 +
* If you have an idea for a workshop or class, please let someone know about it!
 +
** What should NOT stop you from doing a class or workshop is worrying about getting some kind of permission to do it. You have permission. Just let people know about it so that they can 1) help out, and 2) know what the space is being used for
 +
*** We can help with advertising etc.
  
 
== Ideas/plans/dreams/hopes ==
 
== Ideas/plans/dreams/hopes ==

Revision as of 14:39, 12 January 2014

Agenda for the 2014 yearly meeting. January 11, 2014. 1:00PM to 4:14PM

(If this is a little tl;dr, you can always skim it for the "Action Items" sections to know what it is we are expecting people to help with)

Attendees: Nathan, Jenett, Jay, Steve, Nick, Allyn, Heath, Austin, Daniel (through google hangout and IRC)

Contents

Administrivia (Monies, Tax information, Membership, etc)

Meeting notes

Financial information

We reviewed the bank accounts and other financial information. Conclusion: We are doing pretty well, especially compared to previous years. We do have several members who owe back dues, but we are at a good spot as far as paying for bills and other things while having money come in. No bank issues for a long time.

Taxes and School Factory

We are officially a non-profit (and have been for about a year), so we do not pay taxes like we used to. We have 21 months to file taxes after declaring non-profit status, so we need to file this year to be safe. We are not yet a 501c3, but can apply as a 501c4 or 501c7. The most important distinction here is that if we were a 501c3 people would be able to claim their donations to us on their taxes. Right now for them to do that we have to go through School Factory, and when we do that they get 10% of that donation. We are currently working on becoming no longer affiliated with School Factory, but for the time being we have learned how to make the best use of them that we can. To get 501c3 status we have to prove we are a charity and that we do charitable things for the community. We definitely do that, we just need to work on the proving it part. As far as additional paper work goes, we are already filing about as much as we would have to if we weren't affiliated with School Factory, so we are not concerned.

Concerns. One concern raised during the meeting was for how we are allowed to use money through Bloominglabs, as far as being taxed and keeping our non-profit status is concerned. We are allowed to purchase things with Bloominglabs funds for Bloominglabs. We're a valid company. We just aren't allowed to take a profit out of it. We can even hire people and pay them a salary if we wanted to, we just can't take money out of Bloominglabs' bank account and claim it for people.

Donations (of things and of money)

If you hear of people who would like to donate equipment to the space, we can provide them with the paper donation form so that they can use it as a tax deduction if they wish. If they don't care about that, then we can just take their stuff directly. If they want the tax deduction, it must go through School Factory (until we are our own 501c3).

Membership

We are currently at 25 members, but will probably lose another 2 in the next couple of weeks. Around this time last year we did a push for increasing membership, so we will likely need to do the same for this year. We have not heard anything negative to concern us about our decreased membership, but if you do hear something (like "I left because I did not feel welcome") then please speak up so that we can try to mitigate those concerns. For now, though, our members who have left have done so for reasons outside of our control. Members who have left should still be encouraged to attend public meetings.

Concerns. It might not be completely obvious to members that they need to let us know if they are intentionally discontinuing their dues payments because they no longer plan to attend. It's fine if they decide to not be a member for a few months, but they do need to let somebody know for record-keeping purposes.

Making Money

We have been doing a pretty good job with replenishing the bank accounts through workshops. We will try to ramp this up, because it would be nice to have a buffer for potential relocation. See below for more information about these efforts.

Action Items

  • anyone who would like to help Jenett with the taxes side of thing, please speak up and contact her.
  • push for membership!
    • e.g. flyers

Review our achievements from the past year

  • Laser cutter
  • Makevention
  • Membership grew over the summer (has since dropped a bit but still more than last year)
  • We got more press on the Internet/radio/print media
  • Classes and Workshops

Meeting Notes

We got a laser cutter! And broke it twice. Once because of a defective tube, another time because laser tubes apparently do not appreciate the frozen outside air coming in through the direct access vent...oops.

Makevention was obviously awesome, thanks everyone! (especially Jenett)

Membership grew to over 30 at one point! We will get up there again, some day, so we aren't worried about it.

We have had a lot of good press throughout the year, from WFIU and other media events we've participated in. We have heard people say that they took their job in Bloomington specifically because they knew that there was a hackerspace here. We have yet to hear anything negative about the space, and have even specifically looked for it through reviews etc. If you come across anything please say something so we can find out how to improve.

We have put on several workshops and classes throughout the year (Arduino, Lathe, Rain Barrel, etc).

Areas for Improvement

  • Keeping the space clean

Meeting Notes

Any outstanding issues from the 2013 yearly meeting?

  • Security system/video camera?

Meeting Notes

Issues to discuss

  • Potential relocation of space
  • Makevention 2014
  • Non-profit status & relationship with School Factory
  • Not an issue per se, but what things can we do for fundraising and/or apply for grants?
  • Workshops for the coming year
    • Machining class
    • Using PGP encryption with email (signups from Makevention still)
  • Officer elections

Meeting Notes

To run soon: Arduino class, AI class, brewing class, laser class, solar panel class

Action Items

  • If you have an idea for a workshop or class, please let someone know about it!
    • What should NOT stop you from doing a class or workshop is worrying about getting some kind of permission to do it. You have permission. Just let people know about it so that they can 1) help out, and 2) know what the space is being used for
      • We can help with advertising etc.

Ideas/plans/dreams/hopes

  • Group projects (thermostat is going on but more of course would be great)
  • Hack-a-thons (host or participate in them)
  • Monthly or weekly topic-specific events (Thursday's 'Microcontroller Madness', groups like HAM or 3D printing groups)
  • Participation at other events (Louisville Arcade Expo, DerbyCon, other area Maker Faires)

Meeting Notes

Personal tools