Laser cut raspberry pi case

From BloomingLabs
Revision as of 15:32, 11 July 2013 by Austintoombs (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

This raspberry pi case is an instance of this thingiverse project. We set the laser to:

  • power: 90
  • speed: 10
  • current: 80
  • passes: 1

And it worked great with just the 1 pass! Everything came out beautifully. I wrote about the experience on my blog here.

Rpicase1.jpg
Rpicase2.jpg
Rpicase3.jpg
Rpicase4.jpg
Rpicase5.jpg
Rpicase6.jpg
Rpicase7.jpg
Personal tools