Difference between revisions of "PrintrBot Simple"

From Bloominglabs
Jump to: navigation, search
(Restructured, reformatted, and fixed documentation links)
(removed dead link)
Line 1: Line 1:
 
[[Image:PrintrBot.jpg|200px|thumb|PrintrBot its cabinet]]
 
[[Image:PrintrBot.jpg|200px|thumb|PrintrBot its cabinet]]
Bloominglabs has a [http://help.printrbot.com/c/Old_Simple PrintrBot Simple v1 (1310)] 3D printer, controlled with a [[Sunverge | donated ag150]].
+
Bloominglabs has a PrintrBot Simple v1 (1310) 3D printer, controlled with a [[Sunverge | donated ag150]].
  
 
== Official Documentation ==
 
== Official Documentation ==

Revision as of 01:59, 10 November 2016

PrintrBot its cabinet

Bloominglabs has a PrintrBot Simple v1 (1310) 3D printer, controlled with a donated ag150.

Contents

Official Documentation

PrintrBot model 1310 is pretty old, and the information on it is not easily available on printrbot.com. All of the official documentation on the "legacy" printrbots can be found in this google drive folder. The (copyrighted) assembly manual can be found here.

Using Locally

Login to the ag150 with username "blabs". Cura software GPL AFFERO V1

Using via Command Line

Login remotely with secure shell: "ssh -XC blabs@192.168.1.137". The Arduino terminal can be used to directly talk to the PrintrBot. Serial is set up to be 115200 baud.

Useful g-codes

  • M115 reports Firmware installed.
FIRMWARE_NAME: Marlin v1; Sprinter/grbl mashup for gen6 
FIRMWARE_URL:http://www.mendel-parts.com
PROTOCOL_VERSION:1.0
MACHINE_TYPE Mendel
EXTRUDER_COUNT:3
  • M114 reports position.
  • M119 reports endpoint status.
Personal tools