Difference between revisions of "PrintrBot Play"

From Bloominglabs
Jump to: navigation, search
(Created page with "A preassembled [https://printrbot.com/shop/assembled-printrbot-play/ Printrbot Play (model 1505)] was donated arount 7 November 2016. Documentation can be found on [https://d...")
 
(Firmware reloaded - progress but no cigar yet.)
Line 1: Line 1:
A preassembled [https://printrbot.com/shop/assembled-printrbot-play/ Printrbot Play (model 1505)] was donated arount 7 November 2016.
+
A pre-assembled [https://printrbot.com/shop/assembled-printrbot-play/ Printrbot Play (model 1505)] was donated around 7 November 2016.
  
 
Documentation can be found on [https://drive.google.com/drive/u/0/folders/0B9oj0J-4qhdjVldxdkt4TkdxbzQ?tid=0B9oj0J-4qhdjNU1VcmVhS3IwLXc this Google Drive folder].
 
Documentation can be found on [https://drive.google.com/drive/u/0/folders/0B9oj0J-4qhdjVldxdkt4TkdxbzQ?tid=0B9oj0J-4qhdjNU1VcmVhS3IwLXc this Google Drive folder].
 +
 +
 +
----
 +
Printer has been in a nonfunctional state.
 +
 +
February 23, 2017 reloaded bootloader and firmware with avrdude and a USBtinyISP programmer.
 +
 +
Reference  [http://reprap.org/wiki/Printrboard reprap.org/wiki/printrboard]
 +
 +
[https://github.com/scwimbush/Printrboard-HID-Arduino-IDE-Support/tree/master/printrboard/avr/bootloaders  BootloaderHID.hex ]
 +
[https://github.com/Printrbot/firmware-updater/blob/gh-pages/binaries/ play-0.6.hex]
 +
 +
All seems to be working fine now except '''auto-leveling''' Z-axis which is a '''show stopper''' : (

Revision as of 13:14, 23 February 2017

A pre-assembled Printrbot Play (model 1505) was donated around 7 November 2016.

Documentation can be found on this Google Drive folder.



Printer has been in a nonfunctional state.

February 23, 2017 reloaded bootloader and firmware with avrdude and a USBtinyISP programmer.

Reference reprap.org/wiki/printrboard

BootloaderHID.hex play-0.6.hex

All seems to be working fine now except auto-leveling Z-axis which is a show stopper : (

Personal tools