Difference between revisions of "Visual Communication"

From Bloominglabs
Jump to: navigation, search
(Bathrooms)
Line 37: Line 37:
  
 
==== Bathrooms ====
 
==== Bathrooms ====
Go use the restroom. Notice where you are looking while doing your business - now put a sign there! Also remember there are two positions that a toilet gets used (standing and sitting). Sometimes it's easy to forget this. Don't forget to wash your hands - hey look, another place to put flyers (in front of the sink, papertowel dispenser, etc).
+
Go use the restroom. It's quiet and peacful for a moment. Notice where you are looking while doing your business - now put a sign there! Also remember there are two positions that a toilet gets used. Sometimes it's easy to forget this. Don't forget to wash your hands - hey look, another place to put flyers (in front of the sink, above the papertowel dispenser, etc).
  
 
Are you flyering for an event? Business cards are handy to leave on urinals. No one will touch it until the cleaning staff comes through. Same thing for the floor of a stall.
 
Are you flyering for an event? Business cards are handy to leave on urinals. No one will touch it until the cleaning staff comes through. Same thing for the floor of a stall.
 
  
 
== Poster Boards ==
 
== Poster Boards ==

Revision as of 16:38, 11 October 2017

This is a guide to strategic communication with signs.

Contents

Signs, signs, everywhere the signs

While the song contemplates the cultural degredation induced by signs, there is no cheaper force multiplier when it comes to communication with people. "Force multiplier"? Yes. Want everyone to know about a workshop happening? You can tie up one person at the front door all evening to give a message to every person entering the building, or you can post a sign. Or, you can do both if it's an important enough message.


Draft the Message

Write up what you want to say. Then revise it to use fewer words. Then revise it again with fewer words. Remember that every sentence that is added to a sign reduces the chances someone will read it. If your sign simply can't work without a page of text, you MUST include a stand-out TL;DR sentence or exactly 0% of your audience will read it.

Images

Will images help convey meaning? Use images if they can reduce word count or it helps get attention. Raid those clip-art sites and google image search.

Images can make a sign funny or annoying. There is a double-edged sword with funny though: sometimes the message can be lost in the humor. It's not that people don't get the message, it's that all that someone remembers is the funny and not the message. This is an issue with TV commercials: While funny ones get more attention, it's the annoying ones people remember. Remember the "La petite giraffe" commercials with the rich Russian business man? I honestly don't remember what those were advertising, I just remember the gold house, opulence, and the cute tiny giraffe. Hate that annoying carpet warehouse commercial with a guy yelling in monotone scream voice? Yea, everyone does, but everyone also remembers this commercial and that it's about carpets.

Sign Color

For most flyers in Bloominglabs and such I tend to just use plain white paper. However, if this is a yard sign or otherwise REALLY has to be seen, there is only one choice as far as I'm concerned: Flourescent red paper with black text. The outline of the sign can be seen from over 100' away as drivers approach an intersection. Yes it's annoying, but it will be seen even if there are 20 other signs at that same intersection.


The reader and time investment

The easier a sign is to read, the more likely your audience will read it. Conversely, the harder it is for the audience to read it, the fewer of them will take the time to. Mentally walk past your sign and think about how long it takes to read. Does a person have to slow down or stop to read it? Can they get the message without even slowing down? There are two parts to this:

Legibility

Too often I see people forget what a sign is there to do. They choose a fancy font or pastel colors so their sign stands out from all the harsh and brightly colored signs. However that fancy font can only be read from 4 feet away. NEVER trade off form over function with a sign. It's there to communicate, every barrier you put in the readers way reduces the chances it will perform it's function. This is most noticable with yard signs. People often don't realize just how far away the audience is from a yard sign (usually 15-50 feet). Block letters, the largest font the print format will support, and bolded text.

Also, remember the age of your target audience. Youths can read smaller fonts. Anyone over 30 will have a progressively harder time reading that same small font. If you have any interest at all in anyone over 30 reading your signs, make the font as large as the format will allow.

Wordiness

TL;DR is a real world problem. Signs are usually there to get out small bursts of information, not teach the fundamentals of a new subject. On the other hand, sometimes a wall of text is part of the mission. Consider mixing the two: an 8x10" sheet of paper that says "Network Settings for This Building", posted right next to a printoff of all the info someone seeking this info may need.


Location, location, location

When posting signs and flyers, you need to think strategicly. Observe an area and look for bottle-necks in peoples movement. Doorways are great. You can post flyers on doors, or on walls next to doors. Also notice, does a door stay open for periods of time? Will this hide a flyer if it's only on one side of a door? Should the flyer be posted on both sides of the door? It all depends on what you are communicating. Conversely, putting a sign above or below eye-level will reduce the number of people who see it. This could be part of the plan, just have another plan for the 70% who didn't look up.

Know your audience

Who is the intended audience? If you have a flyer aimed at a larger audience (the public), post signs near a main entryway for a building. Is it aimed at a members of a group? Interior locations deeper in a building can be used instead.

Bathrooms

Go use the restroom. It's quiet and peacful for a moment. Notice where you are looking while doing your business - now put a sign there! Also remember there are two positions that a toilet gets used. Sometimes it's easy to forget this. Don't forget to wash your hands - hey look, another place to put flyers (in front of the sink, above the papertowel dispenser, etc).

Are you flyering for an event? Business cards are handy to leave on urinals. No one will touch it until the cleaning staff comes through. Same thing for the floor of a stall.

Poster Boards

These are great ways to put lots of information out for people to read. I tend to use them when I want to put more information out than a single 8.5"x11" sheet of paper can display. Also, printing can be done on ordinary printer paper and multiple sheets can be organized together to get more information out there. They are also easy to move when needed. They can be hung on a wall or put on a freestanding easle in an open area.

Assembly: Use rubber cement. It dries clear, and excess glue can be rubbed off without leaving any marks behind. The finished look is seamless and high quality.

Workshop Posters

Often workshop walls are blocked by shelving or hanging tools, a poster board can be tucked into a space with the majority of the sign sticking out into view. Also, sometimes information needs to be dense. Printing imperial/metric conversion charts and attaching to poster board helps keep information at your finger-tips but out of the way when not needed. The entire board can be wrapped in saran-wrap to keep finger prints and dust at bay. The same can be done with machine tool instructions.


Events - The Posting of Strategic Information

At our maker faire event (Makevention), I make extensive use of poster board signs in the Bloominglabs booth. While we have people manning the booth at all times, they can only engage a limited number of people at a time. There are hundreds of people passing through who don't get the chance to talk to anyone. It's important to strategize what info you want to get out to those people. Generally I try to cover these messages:

  • Who are we? What are we about?
  • What cool things have we done recently?
  • Are we having a fundraiser?
  • How do you (as Joe public) get involved with our group?
  • Is there anything we need?

The public goal of Makevention is to communicate those things. Signage is invaluable for getting this information out.


Community Memory

Groups like hackerspaces/makerspaces face a unique challenge with member turnover. The group as a whole can begin to forget who it was and where it came from. Sometimes this is acceptable, after all every group needs to be free to shift and bend with the needs of the current members. But often this means loosing memory of the amazing things the group did in its earlier years. As founders and members leave and new ones fill their places, the community memory starts to fade. One way to combat this is to make poster boards commemorating events and projects and place them on the walls of your hackerspace. This is similar to a trophy case in the front hall at a public high school. While not everyone will pay attention to it, those new people that wish to learn more about your group can start to get a feel for your groups accomplishments as they walk through. Some people might argue that a wiki does this virtually, and they are partially right. But how many times has a website been lost to disk failure or aged out of usefulness? The sign can just continue to hang on the wall and tell the world what happened.


Stencil Construction

Making a bunch of large signs that requires a stencil? Use the laser cutter. Our current laser will hold material as large as 12"x20". You can tape sheets of construction paper together to fill that 12"x20" bed. You can also cut each word individually if 12x20 is too small. DO NOT CUT CARDBOARD! It catches fire much easier than paper. Watch your job very carefully though as paper can ignite too. Always use 100% speed when cutting paper, and 40% power is plenty even for heavier card-stock.

We also have a paper craft cutter which can do this job.


Yard Signs

I've already mentioned this earlier, but yard signs require strategic placement also. Remember: your audience is going to at least 15 feet away if not further. Use clear bold fonts, and make the text as large as possible. Remember to think about where cars bottleneck at an intersection. You probably want the sign back a ways from the intersection where people will be stopped. Even those stopping ahead of it will be moving slowly and are more likely to see it.

Placement hazards

Yard signs get pulled and discarded when they don't have permission to be there. All signs placed on IU property get pulled and thrown away on a daily basis, never post them on IU property. Places that already sell advertising like bus stops should be avoided, these are policed and the city WILL contact you about your flyer.

Look for parts of an intersection that are public land or that often get signs posted without trouble. Places that are private property but far away from the building can sometimes get by without problems.

Location

You can post a sign in your yard and that's great if you want your neighbors to know something. If you want to use all your signs at round-abouts and neighborhood intersections, that's fine if you only want to reach a few people that live in that area. Garage sales are a good candidate for this.

However if you want to reach more people though, post signs at higher traffic intersections. An in-town intersection is ok. But an intersection at a major highway for the city will reach WAY more people then that. Twice a day many hundreds of people if not more will pass each ingress/egress point for the city. Take advantage of that if you want the word to get out as wide as possible.

Personal tools