PrintrBot Simple: Difference between revisions

From Bloominglabs
Jump to navigationJump to search
mNo edit summary
(Added link to 3D Printers page)
 
(8 intermediate revisions by 5 users not shown)
Line 1: Line 1:
[http://help.printrbot.com/c/Old_Simple PrintrBot Simple v1 (1310)]
[[Image:PrintrBot.jpg|200px|thumb|PrintrBot its cabinet]]
Bloominglabs has a PrintrBot Simple v1 (1310) [[3D Printers|3D printer]], controlled with a [[Sunverge | donated ag150]].


== Official Documentation ==
Useful things to know:
PrintrBot model 1310 is pretty old, and the information on it is not easily available on printrbot.com. All of the official documentation on the "legacy" printrbots can be found in [https://drive.google.com/open?id=0B9oj0J-4qhdjWThtZmY2YzJIRE0 this google drive folder]. The (copyrighted) assembly manual can be found [https://drive.google.com/open?id=0B9oj0J-4qhdjVXZhU3l6Um5LVTg here].
USB needs to have 12volt power supplied to other power connector. I will try to find out what amperage is needed.


== Using Locally ==
⚫
Serial is set up be 115200 baud.
Login to the ag150 with username "blabs".
⚫
[https://ultimaker.com/en/products/cura-software Cura] software GPL AFFERO V1


== Using via Command Line ==
⚫
Arduino terminal can be used to directly talk to the PrintrBot.
Login remotely with secure shell: "ssh -XC blabs@192.168.1.137".
⚫
Useful [http://reprap.org/wiki/G-code g-codes] to use:
⚫
The Arduino terminal can be used to directly talk to the PrintrBot.
⚫
Serial is set up to be 115200 baud.


⚫
=== Useful [http://reprap.org/wiki/G-code g-codes] ===
M115
⚫
* <code>M115</code> reports Firmware installed.


FIRMWARE_NAME: Marlin v1; Sprinter/grbl mashup for gen6
⚫
Reports Firmware installed.
FIRMWARE_URL:http://www.mendel-parts.com
PROTOCOL_VERSION:1.0
MACHINE_TYPE Mendel
EXTRUDER_COUNT:3


* <code>M114</code> reports position.
M114


* <code>M119</code> reports endpoint status.
Reports position.


M119


[[Category:Tools]] [[Category:3D Printers]]
Reports endpoint status.

----
⚫
[https://ultimaker.com/en/products/cura-software cura] software GPL AFFERO V1


[[Category:Projects]]

Latest revision as of 01:45, 14 July 2017

PrintrBot its cabinet

Bloominglabs has a PrintrBot Simple v1 (1310) 3D printer, controlled with a donated ag150.

Official Documentation

PrintrBot model 1310 is pretty old, and the information on it is not easily available on printrbot.com. All of the official documentation on the "legacy" printrbots can be found in this google drive folder. The (copyrighted) assembly manual can be found here.

Using Locally

Login to the ag150 with username "blabs". Cura software GPL AFFERO V1

Using via Command Line

Login remotely with secure shell: "ssh -XC blabs@192.168.1.137". The Arduino terminal can be used to directly talk to the PrintrBot. Serial is set up to be 115200 baud.

Useful g-codes

  • M115 reports Firmware installed.
FIRMWARE_NAME: Marlin v1; Sprinter/grbl mashup for gen6 
FIRMWARE_URL:http://www.mendel-parts.com
PROTOCOL_VERSION:1.0
MACHINE_TYPE Mendel
EXTRUDER_COUNT:3
  • M114 reports position.
  • M119 reports endpoint status.
Retrieved from "https://bloominglabs.org/index.php?title=PrintrBot_Simple&oldid=3324"