PrintrBot Play: Difference between revisions

Revision as of 23:48, 19 November 2017

A pre-assembled Printrbot Play (model 1505) was donated around 7 November 2016. It is one of several 3D Printers Bloominglabs has.

The complete, official documentation can be found on this Google Drive folder.

When the Printrbot Play was donated, it was nonfunctional. On February 23, 2017, Apple reloaded the bootloader and firmware with:

avrdude
a USBtinyISP programmer.
the RepRap wiki page on the Printrbot's control board: reprap.org/wiki/printrboard
BootloaderHID.hex
play-0.6.hex

The controller board, firmware, steppers, and sensors seem to be working fine.

Challenge now is test various filaments and to locate printer in a more permanent location with a dedicated ag150.

@@ Line 4: / Line 4: @@
+==Original Condition==
-----
+When the Printrbot Play was donated, it was nonfunctional.
-Printer has been in a nonfunctional state.
+On February 23, 2017, [[User:Apple | Apple]] reloaded the bootloader and firmware with:
+* avrdude
+* a USBtinyISP programmer.
+* the RepRap wiki page on the Printrbot's control board: [http://reprap.org/wiki/Printrboard reprap.org/wiki/printrboard]
+* [https://github.com/scwimbush/Printrboard-HID-Arduino-IDE-Support/tree/master/printrboard/avr/bootloaders   	BootloaderHID.hex ]
+* [https://github.com/Printrbot/firmware-updater/blob/gh-pages/binaries/ play-0.6.hex]
+The controller board, firmware, steppers, and sensors seem to be working fine.
-February 23, 2017 reloaded bootloader and firmware with avrdude and a USBtinyISP programmer.
-Reference  [http://reprap.org/wiki/Printrboard reprap.org/wiki/printrboard]
-[https://github.com/scwimbush/Printrboard-HID-Arduino-IDE-Support/tree/master/printrboard/avr/bootloaders   	BootloaderHID.hex ]
-[https://github.com/Printrbot/firmware-updater/blob/gh-pages/binaries/ play-0.6.hex]
-With an ATX power supply,  controller board, firmware, steppers, and sensors seem to be working fine.
 Challenge now is test various filaments and to locate printer in a more permanent location with a dedicated ag150.