PrintrBot Simple: Difference between revisions
From Bloominglabs
Jump to navigationJump to search
m (Apple moved page PrinterBot to PrintrBot: Damn autocorrelation misspelled it) |
(Adding details about PrintrBot) |
||
Line 1: | Line 1: | ||
[http://help.printrbot.com/c/Old_Simple PrintrBot Simple v1 (1310)] |
[http://help.printrbot.com/c/Old_Simple PrintrBot Simple v1 (1310)] |
||
[[File:PrintrBot.jpg|200px|thumb|left|PrintrBot in box]] |
|||
Set up to be controlled with a [[Sunverge|Sunverge donated ag150 box]] in isolation box. |
|||
---- |
|||
Login directly with username "blabs" or remotely with secure shell: "ssh -XC blabs@192.168.1.137" |
|||
Useful things to know: |
Useful things to know: |
||
Line 8: | Line 15: | ||
Arduino terminal can be used to directly talk to the PrintrBot. |
Arduino terminal can be used to directly talk to the PrintrBot. |
||
Useful [http://reprap.org/wiki/G-code g-codes] to use: |
Useful [http://reprap.org/wiki/G-code g-codes] to use: |
||
---- |
|||
M115 |
M115 |
||
Reports Firmware installed. |
Reports Firmware installed. |
||
FIRMWARE_NAME: Marlin v1; Sprinter/grbl mashup for gen6 |
|||
FIRMWARE_URL:http://www.mendel-parts.com |
|||
PROTOCOL_VERSION:1.0 |
|||
MACHINE_TYPE Mendel |
|||
EXTRUDER_COUNT:3 |
|||
---- |
|||
M114 |
M114 |
Revision as of 13:33, 29 October 2015
Set up to be controlled with a Sunverge donated ag150 box in isolation box.
Login directly with username "blabs" or remotely with secure shell: "ssh -XC blabs@192.168.1.137"
Useful things to know: USB needs to have 12volt power supplied to other power connector. I will try to find out what amperage is needed.
Serial is set up be 115200 baud.
Arduino terminal can be used to directly talk to the PrintrBot. Useful g-codes to use:
M115
Reports Firmware installed.
FIRMWARE_NAME: Marlin v1; Sprinter/grbl mashup for gen6
FIRMWARE_URL:http://www.mendel-parts.com
PROTOCOL_VERSION:1.0
MACHINE_TYPE Mendel
EXTRUDER_COUNT:3
M114
Reports position.
M119
Reports endpoint status.
cura software GPL AFFERO V1