SatNOGS Ground Station v3
Satellite Networked Open Ground Station
I'm currently working on getting two types of ground stations working. The first will be a stationary/no-rotator station which can pick up satellites as they pass overhead. The second station will be a rotator based station. This page will track my progress on both stations.
Info on the work I did on the v2 rotator ground station can be found here: SatNOGS_Ground_Station_v2
No-Rotator Station
I have a UHF "paralindy" antenna I've built with cshields, we did some preliminary testing and found they work well enough to continue testing. I've also mostly completed a 2m Lindenblad that the paralindy was loosely based on, that seems to work too.
v3.1 Rotator Station
Piecing together a complete build-of-materials for the latest version of the rotator is a little challenging. As of February 2019 a good summary can be found in this forum post: https://community.libre.space/t/ground-station-hardaware-report/3235.
When looking for documentation it's important to remember that information can live in 3 places: The wiki, the assembly guides, and in gitlab.
Build page for the hardware/mechanical parts
Build page for the rotator controller (electronics)
- https://wiki.satnogs.org/SatNOGS_Rotator_Controller
- BOM for above board: https://gitlab.com/librespacefoundation/satnogs/satnogs-rotator-controller/blob/v2.2/satnogs-rotator-controller-bom.ods
- The position encoder needed for DC motors is a separate project: [1]
